Don´t worry - here is our guide on how to take the measurements at home yourself!
We will be there remote on Skype to assist you in every step of the measuring and answer all your questions.
PREPARATIONS
- Wear breeches and socks that you would want to fit under the boots
- You need a tape measure, a pen, paper and an assistant to take the measurements
- Download our order form and fill it out after each measurement
- Measurements 1-4 should be taken while you are in a seated position and 5-12 while standing.
- See our film about how a fitting should be done
Follow the steps below
1. LENGTH OF THE FOOT + SHOE SIZE
A tip is to stand of a piece of paper agains a wall, with even weigh on both feet. Draw a line at the tip of the toe, then measure the length on the paper.
Also provide your regular foot size, we do have half sizes as well.
2. WIDEST PART OF THE FOOT
The ball girth, where you might bend the foot. Measure the widest part of the foot while sitting down.
3. INSTEP
The upper part of the foot. Find the instep bone on the top of the foot and measure around the arch.
4. HEEL ARCH
Measure in a sitting position, from the heel to the place you normally tie your laces.
5. ANKLE
Measure the thinnest part of the leg in a standing position.
6. LOWER LEG
Measure in a standing position, where the calf starts. Normally this measure is around 20 cm from the ground.
7. CALF
Find the widest part of the calf, double check to find the right place when measureing.
8. THE TOP / UNDER THE KNEE
Measure while standing, this is the measure of the top of the boots.
9. HEIGHT UP TO MEASURE 5
Measure the height form the ground up to the place where you took measure 5.
10. HEIGHT UP TO MEASURE 6
Measure the height form the ground up to the place where you took measure 6.
11. HEIGHT UP TO MEASURE 7
Measure the height form the ground up to the place where you took measure 7.
12. TOTAL HEIGHT
This is the total height of the boots. If you have another pair of boots, please use them as a reference. Measure the back side of the boots, outer sole excluded. Then see if that height matches your leg. The final boots will drop a bit as well, so normally 1 cm is added to this measurement.
Plain
Piping
Brogue top
Single top
Double top
Single top with bling
Single top with brogue
Double top with bling
Triple top
Heart top
Heart brogue top
Anchor top
Drop top
Hunter top
Plain
Floral
Double stitched
Double stitched with floral
Straight Brogue
Straight brogue with floral
Heart double stitched
Heart double stitched with floral
Heart brogue
Heart brogue with floral
Eyelets Oxid Steel
Eyelets Steel
Hooks Oxid Steel
Hooks Antique Brass
Hooks Rose Gold
Hooks Brass
Hooks Steel
Hooks & Eyelets - No hardware only holes
Bling - Crystals Light Pink
Bling - Crystals Royal Blue
Bling - Crystals Black
Bling - Crystals Gold
Bling - Crystals Silver
Bling - Line of Diamantes Rose Gold
Bling - Line of Diamantes Gold
Bling - Line of Diamantes Silver
2 straps
Polo Buckle Rose Gold
Polo Buckle Oxid Steel
Polo Buckle Antique Brass
Polo Buckle Brass with Bling
Polo Buckle Brass
Polo Buckle Steel with bling
Long pressure button brass
Long pressure button steel
Be inspired by our other customers design for Design your own tall boots
Celeris is a small family business located in northern Portugal where the production and manufacture of our riding boots is a solid craft made with great experience, precision and passion. As all riding boots are made completely by hand and are completely unique in terms of both design and dimensions, the production takes longer than for ordinary riding boots. The production time is estimated to about 4 months, but this is something we cannot guarantee as several factors such as accessto different leathers and materials at our tanneries can vary as well as the coating ingeneral in our workshop. We obviously do our best to be able to deliver your dream boots within the set time.
